What should fiber laser cutting machine pay attention to?

What should be paid attention to in layout of fiber laser cutting machine?

Before using the laser cutting machine, we will import the prepared drawings into the program, and then use the typesetting software to arrange the drawings on a board, so that the laser cutting machine can process the products in batches. Among them, although the typesetting process is very short, there is a lot of knowledge hidden in it. If the typesetting is slightly wrong, it will have a great impact on the cutting effect of the whole board. So, let's list six points for attention in typesetting.

1、 Corner melting

When cutting the corner of sheet steel at a reduced speed, the laser will melt the corner due to overheating. A small radius is generated at the corner to maintain the high-speed laser cutting and avoid overheating and melting of steel plate when cutting the corner, so as to obtain good cutting quality, reduce cutting time and improve productivity.

2. Coplanar cutting

When two or more parts are combined into a group, large quantities of regular graphics should share the same side as much as possible. Cutting at the same side can greatly shorten cutting time and save raw materials.

3. Disposal of surplus materials

After cutting the parts, the framework like surplus material on the working table of laser cutting equipment needs to be removed as soon as possible to facilitate the subsequent cutting operation. For the laser cutting equipment without automatic discharge device, the skeleton like surplus material can be cut into small pieces to facilitate rapid removal. So as to avoid personal injury caused by the operator moving heavy and sharp edge surplus materials.